Advertisement
ADDITIONAL SAFETY RULES FOR TOOL
1.
This tool is specifically designed t o drill in woods/metals or t o drive wood
2.
Always be sure you have
a
firm footing.
3.
Always secure small workpieces in a vise or similar hold-down device.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. When drilling into walls, floors or wherever "live" electric wires may be
encountered,
DO NOT
TOUCH ANY METAL PARTS
OF
THE
TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock
if you drill into a "live" wire.
screws. Do not use it for other purposes.
Be sure no one is below when using the tool in high locations.
7. Do
not leave the tool running. Operate the tool only when hand-held.
8.
Do not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
Advertisement
