Makita UC120D Instruction Manual page 43

ENGLISH
EC-DECLARATION OF CONFORMITY
The undersigned, Yasuhiko Kanzaki, authorized
by Makita Corporation, 3-11-8 Sumiyoshi-Cho, Anjo,
Aichi 446-8502 Japan declares that the battery-powered
chain saw
Model UC120D (Serial No. : series production)
manufactured by Makita Corporation in Japan is in com-
pliance with the following standards or standardized doc-
uments,
HD400, EN292, EN608, EN60204, EN55014
in accordance with Council Directives, 89/336/EEC,
98/37EC and 73/23/EEC.
EC Type Examination Certificate was issued by: SEMKO
AB, Torshamnsgatan 43, Box 1103, S-164 22 KISTA,
SWEDEN
EC Type Examination Certificate No.: MD101
FRANÇAISE
DÉCLARATION DE CONFORMITÉ CE
Je soussigné, Yasuhiko Kanzaki, mandaté par Makita
Corporation, 3-11-8 Sumiyoshi-Cho, Anjo, Aichi
446-8502 Japan, déclare que le tronçonneuse à batterie
Modèle UC120D (No. de série: production en série)
fabriqué par Makita Corporation au Japon, est conforme
aux normes ou aux documents normalisés suivants,
HD400, EN292, EN608, EN60204, EN55014
conformément aux Directives du Conseil, 89/336/CEE,
98/37/EG et 73/23/CEE.
Un Certificat d'inspection de type EC a été émis par :
SEMKO AB, Torshamnsgatan 43, Box 1103, S-164 22
KISTA, SWEDEN
Certificat d'inspection de type EC No : MD101
DEUTSCH
CE-KONFORMITÄTSERKLÄRUNG
Hiermit erklärt der Unterzeichnete, Yasuhiko Kanzaki,
Bevollmächtigter von Makita Corporation, 3-11-8
Sumiyoshi-Cho, Anjo, Aichi 446-8502 Japan, daß die von
der Firma Makita Corporation in Japan hergestellte die
Akku-Kettensäge
Modell UC120D (Serien-Nr.: Serienproduktion)
gemäß den Ratsdirektiven 89/336/EWG, 98/37/EG und
73/23/EWG mit den folgenden Normen bzw. Normendo-
kumenten übereinstimmt:
HD400, EN292, EN608, EN60204, EN55014
Das EG-Typenprüfzertifikat wurde ausgestellt von:
SEMKO AB, Torshamnsgatan 43, Box 1103, S-164 22
KISTA, SWEDEN
EG-Typenprüfzertifikat-Nr.: MD101
Yasuhiko Kanzaki CE 94
Director
Directeur
Direktor
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
ITALIANO
DICHIARAZIONE DI CONFORMITÀ
CON LE NORME DELLA COMUNITÀ EUROPEA
Il sottoscritto Yasuhiko Kanzaki, con l'autorizzazione
della Makita Corporation, 3-11-8 Sumiyoshi-Cho, Anjo,
Aichi 446-8502 Japan, dichiara che il motosega a batte-
ria
Modello UC120D (Numero di serie: Produzione in serie)
fabbricate dalla Makita Corporation in Giappone è con-
forme alle direttive europee riportate di seguito:
HD400, EN292, EN608, EN60204, EN55014
secondo le direttive del Consiglio 89/336/CEE, 98/37/CE
e 73/23/CEE.
Il Certificato di esaminazione tipo CE è stato rilasciato
da: SEMKO AB, Torshamnsgatan 43, Box 1103, S-164
22 KISTA, SWEDEN
Certificato di esaminazione tipo CE No.: MD101
NEDERLANDS
EG-VERKLARING VAN CONFORMITEIT
De ondergetekende, Yasuhiko Kanzaki, gevolmachtigd
door Makita Corporation, 3-11-8 Sumiyoshi-Cho, Anjo,
Aichi 446-8502 Japan verklaart dat de accu-kettingzaag
Model UC120D (Serienr. : serieproduktie)
vervaardigd door Makita Corporation in Japan voldoet
aan de volgende normen of genormaliseerde docu-
menten,
HD400, EN292, EN608, EN60204, EN55014
in overeenstemming met de richtlijnen van de Raad
89/336/EEC, 98/37/EC en 73/23/EEC. EG Certificaat van
Type-onderzoek werd verleend door: SEMKO AB, Tor-
shamngatan 43, Box 1103, S-164 22
KISTA, ZWEDEN
EG Certificaat van Type-onderzoek Nr.: MD101
ESPAÑOL
DECLARACIÓN DE CONFORMIDAD DE LA CE
El abajo firmante, Yasuhiko Kanzaki, autorizado por Mak-
ita Corporation, 3-11-8 Sumiyoshi-Cho, Anjo, Aichi 446-
8502 Japan, declara que la tijera para motosierra a bat-
ería
Modelo UC120D (Número de serie: producción en serie)
fabricado por Makita Corporation en Japón cumple las
siguientes normas o documentos normalizados,
HD400, EN292, EN608, EN60204, EN55014
de acuerdo con las directivas comunitarias, 89/336/EEC,
98/37CE y 73/23/EEC.
El certificado de examen tipo EC fue emitido por:
SEMKO AB, Torshamnsgatan 43, Box 1103, S-164 22
KISTA, SWEDEN
Certificado de examen tipo EC N.°: MD101
Amministratore
Directeur
Director
43