Rear Panel - NETGEAR WNDR3700v5 User Manual

Table 1. LED descriptions (continued)
LED Description
USB port •
•
•
WPS
•
•

Rear Panel

The rear panel connections and buttons are shown in the following figure.
WPS WiFi On/Off
button button
Figure 2. Router rear panel
The WPS button lets you use WPS to join the WiFi network without typing the WiFi password.
See WiFi Connection
Pressing the WiFi On/Off button for two seconds turns the WiFi radios on and off.
Pressing the Reset button restores the factory settings. See
N600 WiFi Dual Band Gigabit Router
Solid green. A USB device is connected and is ready.
Blinking. A USB device is plugged in and is trying to connect.
Off. No USB device is connected, or someone clicked the Safely Remove Hardware
button and it is now safe to remove the attached USB device.
Blinking for two minutes. Someone pressed the WPS button on the router to join the
WiFi network. See WiFi Connection
Solid green. Someone used WPS to connect to the WiFi network.
USB Ethernet
port
LAN ports 1–4
on page 15.
Hardware Setup
on page 15.
WAN Reset Power
(Internet) button On/Off connector
port button
Factory Settings
10
Power
on page 159.