Sony FDR-X1000V How To Use Manual page 55

RESET: Initializes the user bit.
Press the ENTER button to display [SURE?] while [OK] is displayed, then press the ENTER button again.
T.REC: Sets the recording time of the user bit.
OFF: Does not record the time as a user bit.
ON: Records the time as a user bit.
BACK: Returns to the [UBSET] menu.
Note
When [V.FMT] is set to [MP4], [TC/UB] is not available.
[47] How to use
IR-Remote Control
You can start/stop recording and initialize the time code using the infrared remote control (RMT-845
(sold separately)).
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [IR-RC], then press the
ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button.
ON: Allows you to operate the camera using the infrared remote control.
OFF: Prevents operation of the camera using the infrared remote control.
BACK: Returns to the [IR-RC] menu.
Note
The infrared remote control RMT-845 (sold separately) is required to use this function.
Changing the Settings Camera settings