Makita 5704R Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Saw
  5. 5704R
  6. Instruction manual

Makita 5704R Instruction Manual

Circular saw
Hide thumbs Also See for 5704R:

Advertisement

Table of Contents

See also: Instruction Manual
INSTRUCTION MANUAL

Circular Saw

5704R
005407
DOUBLE INSULATION
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita 5704R

Summary of Contents for Makita 5704R

  • Page 1: Circular Saw

    INSTRUCTION MANUAL Circular Saw 5704R 005407 DOUBLE INSULATION IMPORTANT: Read Before Using.

  • Page 2: Specifications

    EC Declaration of Conformity ENG905-1 Makita Corporation responsible Noise manufacturer declare that the following Makita The typical A-weighted noise level determined according machine(s): to EN60745: Designation of Machine: Sound pressure level (L ) : 85 dB(A)

  • Page 3: General Power Tool Safety Warnings

    The technical documentation is kept by: Keep cord away from heat, oil, sharp edges or Makita International Europe Ltd. moving parts. Damaged or entangled cords Technical Department, increase the risk of electric shock.

  • Page 4: Circular Saw Safety Warnings

    Power tool use and care Do not reach underneath the workpiece. The 18. Do not force the power tool. Use the correct guard cannot protect you from the blade below the power tool for your application. The correct workpiece. power tool will do the job better and safer at the Adjust the cutting depth to the thickness of rate for which it was designed.
  • Page 5 − if the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig into the top surface of the wood causing the blade to climb out of the kerf and jump back toward the operator.
  • Page 6 with the retracting handle and make sure it moves without decrease in blade speed to avoid freely and does not touch the blade or any other overheating the blade tips. part, in all angles and depths of cut. 29. Do not attempt to remove cut material when 19.

  • Page 7: Functional Description

    FUNCTIONAL DESCRIPTION CAUTION: Always be sure that the tool is switched off and • unplugged before adjusting or checking function on the tool. Adjusting depth of cut 1. Lever 000029 34. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact.

  • Page 8: Riving Knife Adjustment

    • beyond the lower edge of the riving knife. at the front of the tool. Switch action Use only the Makita wrench to install or remove the • blade. 1. Switch trigger To remove the blade, press the shaft lock fully so that the 2.

  • Page 9: Operation

    005414 When you wish to perform clean cutting operation, connect a Makita vacuum cleaner to your tool. Install the joint on the tool using the screws. Then connect a hose of the vacuum cleaner to the joint as shown in the figure.

  • Page 10: Optional Accessories

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Saw blades • Rip fence (Guide rule) • Hex wrench •...
  • Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884378H223...

Table of Contents