Table of Contents
Advertisement
I
XG-NV4SU
Max. distance:
23' (7 m)
Remote control and remote mouse receiver
positioning
The remote control can be used to control the projec-
tor in the ranges shown on the left.
Projector
cz!EE3T~O~ 3om
DI y-j
The remote mouse receiver can be used with the
remote control in the ranges shown to control the
mouse functions
of a connected
computer.
l
The signal from the remote control can be reflected
off
the screen for easy operation,
However, the effective
dis-
tance of the signal may differ due to the screen material.
Remote mouse
This remote control can be used for basic operations
of the projector
as well as operations
of a connected
com-
puter by using the wireless mouse functions and remote mouse receiver. Together with the laser pointer, this
can help you create a more professional
presentation.
a. Connecting the projector to the computer
Connect the projector
and the computer
with the supplied
computer
cable. When using the remote mouse
receiver to operate the computer,
connect the remote mouse receiver to the computer.
See pages 25 and
26 for details on these connections.
A
CAUTION >
l
Always turn on the projector first, then the computer
on.
b. Wireless Mouse Operation
1.
After connecting
the projector
and the computer, turn them on.
2. Slide the MAIN POWER switch on the side of the remote control to ON.
3. When using the remote control as a wireless mouse, slide the MOUSE/ADJUSTMENT
switch to the
MOUSE position. When using the remote control to operate the projector, slide the switch to the ADJ.
position.
A
CAUTION >
l
Do not connect or remove the mouse control cable and the computer
cable to or from the computer
while it is on. This
may damage the computer.
l
The wireless mouse or RS-232C function may not operate if your computer
port is not correctly
set up. Please refer to the
.
operation
manual of the computer
for details on setting up/installing
the correct mouse driver.
9
Advertisement
Table of Contents
