Table of Contents
Advertisement
_ XG-NV4SU
)
Mouse cursor
L-----Laser
light window
Button name
Position of MOUSE/ADJUSTMENT switch
MOUSE
ADJ.
LASERPOINTER/MENU LASER POINTER(GREEN) MENU(RED)
1 RIGHT-CLICK/ENTER 1 RIGHT-CLICK(GREEN) 1 ENTER(RED)
MOUSE/ADJUSTMENT MOUSE(NOTLIT)
ADJUSTMENT(NOTLIT)
LEFT-CLICK
ON (NOT LIT)
-
(BLACKSCREEN
1
SYNCHRONIZATION
ON(RED)
c. Moving the mouse cursor
Press A/V/+/,
on the remote control to move
the mouse cursor on the screen.
l
The amount of pressure applied to the A/V/+/,
buttons
determines
the speed the mouse cursor travels. If you
lightly press the periphery
of the A/V/+/,
buttons, the
mouse cursor moves slowly. If you press hard, the mouse
cursor moves quickly.
l
The mouse sensitivity
can also be adjusted
from your
computer's
operating
system.
d. Selecting the mouse button for two-
button. mouse systems
Use LEFT-CLICK
on the back of the remote
control to correspond
to the left mouse button
on two-button
mouse systems, and RIGHT-
CLICK on the front of the remote control to cor-
respond to the right button.
l
For one-button
systems, use either the LEFT-CLICK
or
RIGHT-CLICK
button.
Using the laser pointer
The laser pointer on the remote control emits a laser
beam from the laser light window. This is a Class II
laser which may impair your sight if directed
into the
eyes. The three marks shown on the left are caution
labels for the laser beam.
l
Do not look into the laser light window or shine the laser
beam on yourself or others. (The laser beam used in this
product
is harmless when directed
onto the skin. How-
ever, be careful not to project the beam directly into the
eyes.)
l
Always use the laser pointer at temperatures
between
41 OF and 104°F ( + 5OC and + 40°C).
l
Use of controls or adjustments,
or performance
of proce-
dures other than those specified
herein may result in haz-
ardous radiation exposure.
Press LASER
POINTER
(#)
to activate
the laser pointer.
When the button is pressed, the light stays on. When the
button is released, the light automatically
goes off.
l
For safety reasons, the laser pointer automatically
goes
off after 1 minute of continuous
use. To turn it on again,
press LASER
POINTER
(*)
one more time.
Using the remote control in a dark room
When the position of the MOUSE/ADJUSTMENT
switch is changed,
the functions of certain buttons on
the remote control also change. You can determine
the function of a button by the color of its backlight
display. See the table on the left,
Press BACKLIGHT
to turn on the backlights
of the opera-
tion buttons for about five seconds.
l
If the MAIN POWER switch on the remote control is left
on for more than 10 minutes without operation,
the power
will automatically
turn off. To turn the power back on,
press any button on the remote control for more than one
second.
10
Advertisement
Table of Contents
