Table of Contents
Advertisement
I
XG-NV4SU
4.
With the G-LCD panel's screen center as refernce, adjust the R-LCD and B-LCD panels.
5.
Finally tighten up the convergence
lock screw "d".
Notes :
@ The eccentric cam is used for convergence
adjustment.
This means that the cam's turning and the linear movement
are not always uniform.
@ This model is not equipped with the LCD image adjustment
mechanism. This is because the cross-dichroic
prism is used for image formation.
When the LCD panels all get into best focus, the images are almost
completely
converged.
Convergence and Focus Adjustments Mechanism
TOP VIEW
SIDE VIEW
G-LCD oanel
Lock screw "a"
mountitig screws
G-LCD
%ock
screw "b"
\
Lock screw "6
Notch and hole "c"
B-LCD
Notch and hole "a"
SIDE VIEW (from inside)
Lock screw "d"
SIDE VIEW (from inside)
Eccentric cam
Eccentric cam
(X direction adjustment)
(Y direction adjustment)
Eccentric cam
Lock screw "d"
@Z direction adjustment)
Advertisement
Table of Contents
