Kenwood NX-5700 User Manual page 25

Monitor Momentary <Moni>
o
Press and hold this key to momentarily turn the transceiver signaling off. Releasing
this key turns the transceiver signaling back on. While signaling is off, you can listen
to all calls that are received on the channel.
Operator Selectable Tone <OST>
o
Refer to "Operator Selectable Tone (OST)" {p. 37} .
OST List
o
Allows you to enter OST List mode.
Playback <Play>
o
Refer to "Playback" {p. 54} .
Priority-channel Select <OSP>
o
Allows you to set a channel as a priority channel.
Public Address <PA>
o
Allows you to use the transceiver as a loudspeaker.
Regroup Request <Regrp>
o
Allows you to send a request to the dispatcher to join the talkgroup set up by the
dispatcher. The channel name for the dynamic regroup channel appears on the
display when the transceiver joins the talkgroup.
Rekey Request <Rekey>
o
Allows you to make a request to update the Encryption key.
RX Audio Equalizer (High)
o
Allows you to set the audio response for high frequencies.
RX Audio Equalizer (High Midrange)
o
Allows you to set the audio response for high midrange frequencies.
RX Audio Equalizer (Midrange)
o
Allows you to set the audio response for midrange frequencies.
RX Audio Equalizer (Low Midrange)
o
Allows you to set the audio response for low midrange frequencies.
RX Audio Equalizer (Low)
o
Allows you to set the audio response for low frequencies.
RX Auto Gain Control
o
Allows you to set the transceiver to automatically adjust the volume of the receiving
sound to a specific level for easy listening.
25