Breville BMO700 Quick Touch Crisp Instruction Booklet page 26

OPERATING YOUR SMART COOK | GRILL SETTING
Veg - Roasted
The SMART COOK ROASTED VEG setting
is suitable for small chat potatoes, pumpkin,
sweet potato and onion.
Cook times are based on vegetables at room
temperature (approx. 20°C)
Preheat the crisper pan in the upper position
by following the prompts in the SMART
COOK ROASTED VEG setting.
Once the pan has completed preheating,
carefully remove the hot crisper pan from the
microwave using ovenproof mitts.
Cut vegetables into 3–5cm even sized pieces
and toss in olive oil. Arrange vegetables on the
pan making sure thicker ends are positioned
towards the outer edges of the crisper pan.
Place crisper pan in the centre of the turntable
in the upper position
Turn the AMOUNT dial to select weight and
press START to begin cooking.
Halfway through the cook program, the oven
will beep and will flash "stir/turn food". Pause
and carefully pull out the crisper pan. Turn
vegetables over, return crisper pan to the
microwave and press START to continue.
At the end of the cooking cycle, allow
vegetables to stand for 5 minutes in the crisper
pan before removing and serving.
Toasted Nuts
The SMART COOK TOASTED NUTS setting
is suitable for toasting whole nuts such as
walnuts, cashews, raw and blanched almonds,
macadamia nuts and pine nuts so they are
golden in colour and crisp in texture.
Weigh nuts and place onto the crisper pan in a
single layer. Place crisper pan in the centre of
the turntable in the lower position.
Turn the AMOUNT dial to select weight and
press START to begin cooking.
Halfway through the cook program, the oven
will beep and will flash "stir/turn food". Pause
and carefully pull out the crisper pan. Stir nuts,
return crisper pan to the microwave and press
START to continue.
At the end of the cooking cycle, if nuts are to
your desired colour and crispness, remove to a
cold plate.
If nuts require more heating, allow nuts to
stand for 5–10 minutes in the crisper pan,
stirring once or twice during this time.
Pizza - Fresh
The SMART COOK FRESH PIZZA setting
is ideal for reheating any cold leftover cooked
pizza so the dough is crisp and the toppings
hot and melted.
Cook times are based on pizza directly from
the fridge (approx. 5°C)
Preheat the crisper pan in the upper position
by following the prompts in the SMART
COOK FRESH PIZZA setting.
Once the pan has completed preheating,
carefully remove the hot crisper pan from the
microwave using ovenproof mitts.
Arrange pizza slices on the pan making sure
thicker ends are positioned towards the outer
edges of the crisper pan. Place crisper pan
in the centre of the turntable in the upper
position.
Turn the AMOUNT dial to select number of
slices and press START to begin cooking.
Halfway through the cook program, the oven
will beep and will flash "stir/turn food". Pause
and carefully pull out the crisper pan. Re-
arrange food so that the food in the centre of
the pan is moved to the outside and vice versa.
Return crisper pan to the microwave and press
START to continue.
At the end of the cooking cycle, allow pizza
slices to stand for 5 minutes in the crisper pan
before removing and serving.
25