Kenwood BL710 series Instructions Manual page 5

Take care when handling the blender as
the goblet and its contents will be very hot.
Take particular care when removing the lid.
The lid is designed to be a tight fit to
prevent leakage. If necessary protect your
hands with a cloth or oven gloves when
handling.
Ensure the goblet is securely attached to
the base and when removing from the
appliance, guide the base and ensure it is
removed together with the goblet.
Ensure that the lid and filler cap are
securely in place before every blending
operation.
Always ensure that the vents in the filler
cap are clear before every blending
operation
When fitting the lid to the goblet always
ensure that the lid and goblet rim are clean
and dry to ensure a good seal and prevent
spillage.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the appliance.
Important - UK only
The wires in the cord are coloured
as follows:
Blue = Neutral
Brown = Live.
The appliance must be protected by
a 13A approved (BS1362) fuse.
Note:
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
.
5
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice. Use your mill (if
supplied) for milling herbs, nuts,
coffee beans and purées.