10/100 Private Ethernet Ports - Hitachi 3080 G2 Hardware Reference Manual

Status/Activity (per port)
Status
Activity

10/100 private Ethernet ports

The 10/100 Private Ethernet Network ports function as an unmanaged switch
for the private management network (refer to the Network Administration
Guide for more information on the private management network). These
ports are used by the server and other devices (such as an external SMU and
other cluster nodes) to form the private management network. There are no
internal connections to the server from these ports; instead, when joining a
server to the private management network, you must connect from one of
these ports to the management interface port on the server.
The 10/100 ports operate at speeds of up to 100 megabits per second, and
require the use of a standard RJ45 cable connector.
The 10/100 Private Management Ethernet Network ports are labeled as
shown next:
Figure 5-11 10/100 Private Management Network Ethernet Ports Label
Once connected, each 10/100 port has two indicator LEDs; one green and
one amber. These LEDs provide link status and network activity status
information as follows:
Status/Activity (Per Port)
Status
Activity
Hitachi NAS Platform 3080/3090 G2 Hardware Reference Guide
Figure 5-10 Fibre Channel storage ports label
Meaning
Green FC link present
(on, not flashing)
Green off No link
Amber flashing Data activity
Amber off No data activity
Meaning
Green 10 or 100 Mbps link present
(On, not flashing)
Green Off No link
Amber Flashing Network activity
Amber Off No network activity
Hitachi NAS Platform server components 51