Canon PIXMA iP6220D Service Manual page 27

<Waste ink counter reset procedures>
In the waste ink counter resetting mode, press the Resume/Cancel button the specified number of time(s) according
to the ink counter reset value listed in the table below, and press the Power button.
Time(s) LED indication
0 times Green (Power)
1 time Orange (Alarm) Reset the platen waste ink counter (0%).
2 times Green (Power)
<Destination settings procedures>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the
destination listed in the table below, and press the Power button.
Time(s) LED indication
0 times Green (Power)
1 time Orange (Alarm) Japan
2 times Green (Power)
3 times Orange (Alarm) USA
4 times Green (Power)
5 times Orange (Alarm) Australia
6 times Green (Power) Asia
7 times Orange (Alarm) China
8 times Green (Power) Taiwan
9 times or
Orange (Alarm) Return to the destination settings mode
more
Note: After setting the destination, be sure to initialize the EEPROM. The destination setting may not
be valid unless the EEPROM is initialized after destination settings.
Confirm the model name in the service test print or EEPROM information print.
[See 3-4. Verification Items, (1) Service test print,
Waste ink counter value
Reset the main waste ink counter (0%).
Re-set the main waste ink counter value to 50%.
Return to the menu selection
Korea
Europe
1-21
Destination
or (2) EEPROM information print.]