Canon PIXMA iP6220D Service Manual page 25

Reset
Saving the settings
Calling up the saved
settings
Head-to-paper distance
setting
(6) Service mode
Function
Service test print
- Model name
- ROM version
- USB serial number
- Waste ink amount
- Destination settings
EEPROM information
print
EEPROM initialization
Waste ink counter reset
selection.
Settings are reset to the original
shipping conditions.
On standalone machine, press the
Menu button to move to
Maintenance / Settings; select
Device Settings, then Reset
Setting.
The current print settings are saved.
On standalone machine, press the
Menu button to move to
Maintenance / Settings; select
Device Settings, then Save
Settings.
The saved print settings are called
up.
On standalone machine, press the
Menu button to move to
Maintenance / Settings; select
Device Settings, then Load
Settings.
Move the paper thickness lever to
set the head-to-paper distance to
Auto or Wide.
Procedures
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
1-19
Remarks
Set a sheet of A4 or letter- sized paper.
For a print sample, see 3-4. Verification
Items, (1) Service test print, <Service test
print sample>.
Set a sheet of A4 or letter- sized paper.
For a print sample, see 3-4. Verification
Items, (2) EEPROM information print
The following items are NOT initialized:
- USB serial number
- Destination settings
- Waste ink counter
The main and platen waste ink counters
can be reset separately.
If the main waste ink amount is 7% or
more, replace the bottom case unit or the
main ink absorber (inside the bottom case