Makita HP2050 Technical Information page 14

W
iring diagram
HP2050F and HP2051F (equipped with flash light)
For Europe, High voltage area
Fix the following lead wires
with this lead holder.
* Switch lead wire (red) for
connecting to insulated terminal
* Choke coil lead wire (orange) for
connecting to insulated terminal
* Choke coil
Fix field lead wire (black)
for connecting to switch,
with lead holder.
Brush holder
Fix the following lead wires
with this lead holder.
* Switch lead wire (red) for
connecting to brush holder
* Lead wire (black) connecting
field terminals A and B
Fix the lead wires passed
through this portion, with
lead holder
Noise suppressor
LED circuit
Fix the lead wires (white) of
LED circuit, with lead holder.
See Fig. A.
Fig. A
* Noise suppressor
Switch
LED
Fig. B
The electrical parts marked with * have to be
set in the illustrated position.
* Insulated terminal
Fix with lead holder
the lead wires passed
through this portion
* Lead wires of power supply cord
* Grounding lead wire (transparent)
P 14 / 17
Fix the following lead wires
with this lead holder.
* Grounding lead wire
(transparent) for connecting
to field core
* Field lead wire (white)
for connecting to insulated
terminal
Brush holder
Fix Lead wire (black)
connecting field terminals
A and B, with lead holder.
Fix the following lead wires
with this lead holder.
* Switch lead wire (blue) for
connecting to brush holder
* Field lead wire (white)
for connecting to insulated
terminal
for connecting to field core
Noise suppressor
LED circuit
Lead wire (blue ) of LED
circuit
Fig. C
Bottom view
(View from cord guard side)