2-52
Overview
2.2.19 redundancy-group
Common to all modes
Syntax
show redundancy-group [config|runtime]
Parameters
config
runtime
Example
RFS7000(config)#show redundancy-group config
Redundancy Group Configuration Detail
Redundancy Feature
Redundancy group ID
Redundancy Mode
Redundancy Interface IP
Number of configured peer(s)
Heartbeat-period
Hold-period
Discovery-period
Handle STP
Switch Installed License
Switch running image version
RFS7000(config)#
RFS7000>show redundancy-group runtime
Redundancy Group Runtime Information
Redundancy Protocol Version
Redundancy Group License
Cluster AP Adoption Count
Switch AP Adoption Count
Redundancy State
Radio Portals adopted by Group
Radio Portals adopted by this Switch : Not Applicable
Rogue APs detected in this Group
Rogue APs detected by this Switch
MUs associated in this Group
MUs associated in this Switch
Radios in selfhealing mode
Selfhealing APs in this Switch
Group maximum AP adoption capacity
Switch Adoption capacity
Established Peer(s) Count
Redundancy Group Connectivity status : Not Applicable
RFS7000>
RFS7000(config)#show redundancy-group
Redundancy Group Configuration Detail
Redundancy Feature
Redundancy group ID
Redundancy Mode
Redundancy Interface IP
Number of configured peer(s)
Heartbeat-period
Hold-period
Discovery-period
Handle STP
Switch Installed License
Switch running image version
Displays redundancy group information.
Displays runtime redundancy group information.
: Disabled
: 1
: Primary
: 0.0.0.0
: 0
: 5 Seconds
: 15 Seconds
: 30 Seconds
: Disabled
: 0
: 1.0.0.0-228D
: 2.0
: 0
: Not Applicable
: Not Applicable
: Disabled
: Not Applicable
: Not Applicable
: Not Applicable
: Not Applicable
: Not Applicable
: Not Applicable
: Not Applicable
: Not Applicable
: Not Applicable
: Not Applicable
: Disabled
: 1
: Primary
: 0.0.0.0
: 0
: 5 Seconds
: 15 Seconds
: 30 Seconds
: Disabled
: 0
: 1.0.0.0-228D