Service; Service Commands; Shows Running System Information - Motorola RFS7000 Series Reference Manual

9.1.9 service

Extended ACL Config Commands
Use this command to invoke service commands to troubleshoot or debug
configurations.
Syntax
service(clear|diag-shell|save-cli|show|start-shell)
Parameters
clear
diag-shell
save-cli
show
start-shell
Example
RFS7000(config-ext-nacl)#service diag-shell
Diagnostic shell started for testing
diag >
boot Reboots the switch
delete Deletes specified file from the system.
exit Exit from the CLI
fallback Configures firmware fallback feature
help Description of the interactive help system
logout Exit from the CLI
no Negate a command or set its defaults
reload Halt and perform a warm reboot
service

Service Commands

show Show running system information
upgrade Upgrade firmware image
RFS7000(config-ext-nacl)#service save-cli
CLI command tree is saved as clitree.html.
This tree can be viewed via web at http://<ipaddr>/cli/clitree.html
RFS7000(config-ext-nacl)#
RFS7000(config-ext-nacl)#service show ?
cli
command-history
crash-info
info
last-passwd
reboot-history
startup-log
upgrade-history
RFS7000(config-ext-nacl)#service show
RFS7000(config-ext-nacl)#service start-shell
Last password used: password with MAC 00:a0:f8:65:ea:8e
Password:
Removes specified support information.
Provides diagnostic shell access to debug and test the RFS7000 Switch.
Saves the CLI tree for all modes in html format.

Shows running system information.

Provides shell access.
Show CLI tree of current mode
Display command (except show commands) history.
Display information about core, panic and AP dump files
Show snapshot of available support information
Display last password used to enter shell
Show reboot history
Show startup log
Show upgrade history
instance
(config-if)
9-19