Return The Extender To Its Factory Default Settings - NETGEAR EX3700 User Manual

3. When prompted, enter your email address and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Other Settings.
6. Click the BROWSE button.
7. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_EX7000.cfg.
CAUTION:
After you click the RESTORE button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
8. Click the RESTORE button.
A confirmation pop-up screen displays.
9. Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes
about one minute.

Return the Extender to Its Factory Default Settings

Under some circumstances (for example, if you lose track of the changes that you made to
the extender settings), you might want to erase the configuration and reset the extender to
factory default settings.
To reset the extender to factory default settings, you can either use the Factory Reset button
on the rear panel or log in to the extender and reset it.
For a list of factory default settings, see
AC750 WiF Range Extender
.
Factory Default Settings
Maintain and Monitor the Extender
37
on page 46.