Specifications - Makita DBO140 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Orbits per minute(min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DBO140
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model
Paper size
Low speed
-1
)
Middle speed
High speed
Dimensions
Net weight
Rated voltage
) : 78 dB (A)
pA
DBO140
1.6 kg
D.C. 14.4V
END004-4
Model DBO180
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration
determined according to EN60745:
Model DBO140
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DBO180
Work mode : sanding metal plate
Vibration emission (a
ENE052-1
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
ENG905-1
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
2
125 mm
7,000
9,500
11,000
175 mm x 123 mm x 153 mm
) : 77 dB (A)
pA
Wear ear protection
total value (tri-axial
) : 2.5 m/s
h
2
) : 2.5 m/s
h
2
DBO180
1.7 kg
D.C. 18V
ENG900-1
vector sum)
2
or less
2
or less
ENG901-1