Figure 5-6: Dhcp Or Static Ip Address; Figure 5-7: Ip Settings - Linksys WVC11B User Manual

Wireless-B Internet Video Camera
7. If your network has a DHCP server, such as a router with DHCP enabled, click the Automatic Configuration-
DHCP radio button. If you need to assign a static IP address to the Camera, keep the default setting, Static IP
address.
Then click the Next button.
8. If you selected Automatic Configuration-DHCP in step 7, then proceed to step 9. If you selected Static IP
Address, then the IP Settings screen will appear. Enter an IP Address, Subnet Mask, and Default Gateway
appropriate for your network. You must specify an IP Address and Subnet Mask on this screen. If you are
unsure about the Default Gateway, it is better to leave this field blank. Then complete the Primary DNS and/or
Secondary DNS fields. You must enter at least one DNS address, which can be obtained from your ISP. Click
the Next button.
Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera
Setup Wizard

Figure 5-6: DHCP or Static IP Address

Figure 5-7: IP Settings

12