Using The Wireless Usb Network Adapter's Wall Mount - Linksys WUSB11 User Manual

Removing the Wireless USB Network Adapter
The adapter is Hot Swappable; this means that you can remove or reconnect the
adapter whenever you want.
Note: If you have multiple USB ports on your PC, plug the adapter
into the same port; otherwise, the adapter will be detected as a new
device.

Using the Wireless USB Network Adapter's Wall Mount

The Wireless USB Network Adapter's Wall Mount allows you to easily install
the Wireless USB Network Adapter onto your wall for convenient use and bet-
ter reception.
Before installing the Wall
Mount into the Wireless USB
Network Adapter, take the
separate adhesive strip of
velcro and attach it to the
wall where you will be
mounting the Wireless USB
Network Adapter.
The Wall Mount, shown in Figure 5-3, is included with the Wireless USB
Network Adapter.
To install it into the Wireless
USB Network Adapter, sim-
ply slide it into the Adapter's
back, as shown in steps one,
two, and three.
STEP ONE
13
Instant Wireless TM Series
Figure 5-3
Figure 5-4
Wireless USB Network Adapter
STEP TWO
STEP THREE
Figure 5-6
Once the Wall Mount is attached to the Wireless USB Network Adapter, stick
it to the velcro strip you've attached to your wall for wall mounting.
Figure 5-5
14