Table of Contents
Advertisement
Installation instructions
Freestanding Outdoor Grill Installation
WARNING
Excessive Weight Hazard
Use two or more people to move and install the grill.
Failure to do so can result in back or other injury.
BEFORE INSTALLING AND USING THE BARBECUE YOU SHOULD CLEAN ITS INNER PARTS TO
REMOVE ANY MANUFACTURING RESIDUES. FOR MORE INFORMATION ON CLEANING REFER TO
THE "CLEANING AND MAINTENANCE" CHAPTER.
1. Unpack grill. Remove all packaging materials.
2. Move grill into desired outdoor location.
3. Open the hood.
Attach Side Shelf (on some models)
4. Open doors below grill and remove carton. Unpack
side shelf.
5. Locate 4 screws. Install 2 screws in the top 2 holes
on each side of the grill. Leave screws away from
the side of the grill about 0.64 cm.
6. Install side shelf on left side of the grill. Position the
side shelf so that the large end of the keyhole slots
are over the screws.
Place shelf onto the 2 mounting screws. Let the shelf
slide down so the screws are in the narrow neck of
the slots.
A Top of side shelf
B Keyhole slot
C Front of side shelf
D Side of grill
7. Install the bottom 2 screws and tighten.
8. Tighten the top 2 screws.
Attach Cabinet Doors (on some models)
1. Remove foam wrapping from both cabinet doors.
2. Position hinge pins on the door with the hinge
brackets on the cabinet. Gently push down to slide
the pins into place.
A Door hinge pin
B Hinge bracket
A
9
B
C
D
A
B
Advertisement
Table of Contents
