Table of Contents
Advertisement
Installation of the regulator
1. Turn off the main gas supply valve.
2. Disconnect 20 lb LP gas fuel tank (if present).
3. Turn off all burner control valves.
4. Remove rear cover and 2 screws.
5. Use an adjustable wrench to remove the LP
connector from the brass elbow.
6. Use an adjustable wrench to install an NG
connector to the brass elbow.
7. Apply pipe sealant to the threads of the brass
connector. Use pipe thread sealant that is certified
for use with LP gas.
14
Advertisement
Table of Contents
