Setup - Honeywell Marathon User Manual

Setup

Prerequisite: The AC Adapter is assembled and receiving AC power.
Place the battery charger on a flat, horizontal, hard surface or fasten securely to the surface using the openings on the bottom
of the first and fourth charging pocket. Allow space above and behind the battery charger to allow room to insert or remove
batteries and room to attach the AC adapter cable to the Power port.
Do not insert battery packs until the battery charger has finished powering up:
Insert the power connector into the power outlet at the back of the battery charger.
l
AC power is now being applied to the battery charger and it begins to power up.
l
Charge pocket LEDs flash while the battery charger enters and exits the startup check.
l
When the charge pocket LEDs are not illuminated, the battery charger is ready for use.
l
1-6