Selecting The Input Mode - Yamaha YSP-800 Owner's Manual

SELECTING THE INPUT MODE
You can select the type of audio input signals of the selected input source according to your preference or the conditions
of the input source.
,I,
':(j\:'
We recommend setting the input mode to AUTO in most cases.
1
Press one of the input selector buttons on
the remote control to select the desired input
source.
2
Press INPUTMODE on the remote control
repeatedly to toggle between input modes.
• AUTO
Automatically selects audio input signals in the following
priority order:
I) Dolby Digital or DTS
2)PCM
3) Analog
Use this input mode in most cases.
• DTS
Selects only digital signals encoded in DTS.
Compared to AUTO, this input mode provides greater
stability during playback.
Use this input mode when playing back CDs or LDs
encoded in DTS.
• ANALOG
Selects only analog signals.
Even when both digital and analog signals are input
simultaneously, only analog signals are selected.
Notes
• When the input mode is set to AUTO, this unit automatically
plays back multi-channel sources n the selected input mode.
• ANALOG cannot be selected as an input mode if analog signals
are not being input from the selected input source.
When TV or STB
is selected as
the input source
INPUTMODE
q
+
When DVD is
selected as the
input source
When AUX is
selected as the
input source
,',
':(j\:'
You can adjust the default input mode to be selected when the
power of this unit is turned on (see page 72).
• The input mode of VCR is fixed to ANALOG. However, if the
TV OPTICAL IN jack of this unit is assigned to VCR, AUTO,
DTS and ANALOG become available as the input mode of
VCR (see page 71).
• ANALOG is not available as the input mode of DVD and AUX.
81
I