Manual Setup - Yamaha YSP-800 Owner's Manual

MANUAL SETUP
To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment
parameters, as well as to make advanced settings for speaker positions, sound beams, digital input and the OSD. Change
the initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment.
• You can save the settings optimized by the AUTO SETUP procedure (see page 34). A set of settings optimized according to specific
conditions of your listening environment can be recalled later depending on the varying conditions of your listening environment (see
page 35).
• Most of the parameters in SOUND MENU and BEAM MENU are automatically set when you run AUTO SETUP (see page 26). Use
SOUND MENU and BEAM MENU to make additional adjustments.
• BEAM MENU allows you to make settings for the surround sound effects normally available in the speaker settings menu.
• Make settings for the parameters in BEAM MENU first before you make settings for the parameters in SOUND MENU, INPUT
MENU and DISPLAY MENU.
SOUND MENU
Use to manually adjust various parameters related to the sound output.
Item Features Page
TONE CONTROL Adjust,> the output level of high-frequency or low-frequency sound.
69
BEAM LEVEL Adjusts the output level of each beam.
69
SUBWOOFER SET
Adjusts the various subwoofer settings.
70
MUTE LEVEL
Adjusts the muting leveL
70
AUDIO DELAY Adjusts audio delay.
70
ROOM EQ
Adjusts the tonal quality of the listening room.
70
DD/DTS Dynamic Range
Adjusts the dynamic range of Dolby Digital or DTS signals.
71
BEAM MENU
Use to manually adjust various parameters related to the sound beam output.
Item Features Page
SETTING PARAMETERS
Adjusts listening room and listening position settings.
65
BEAM ADJUSTMENT
Adjusts various beam settings. 66
IMAGE LOCATION
Adjusts the position of the front left and right speakers.
68
INPUT MENU
Use to manually adjust various parameters related to the audio and video input.
Item Features Page
INPUT ASSIGNMENT Assigns jacks according to the component to be used.
71
INPUT MODE Selects the initial input of the source. 72
INPUT TRIM Adjusts the input level of the source.
72
INPUT RENAME Renames the displayed input source. 72
DISPLAY MENU
Use to manually adjust various parameters related to the display.
Item
Features Page
DIMMER SET
Adjusts the brightness of the display. 73
OSD SET
Adjusts the display position and the background color of the OSD. 74
UNIT SET
Changes the display unit of measurement. 74
63
I