Administrator Settings-Ip & Vlan, Codec - Cisco TelePresence MX200 G2 User Manual

71 Settings
Administrator Settings—IP & VLAN, Codec
To exit
Administrator
Settings, tap
Back.
To exit Settings
as such, tap
Exit.
Note that there
is no Cancel
function letting
you exit the
menu undoing
any changes you
have made.
Take care!
About IP Settings
You may specify whether to use IPv4
or IPv6 and whether to use static IP
address or DHCP.
When set to Static, applicable
addresses must be set accordingly.
To change these from default values,
tap Advanced (not shown).
Caution! There is no Cancel
function letting you exit the menu
undoing any changes you have
made. Take care!
D1507606 User Guide
Cisco TelePresence SX10, SX20, MX200 G2,
MX300 G2, MX700, MX800, SX80
Produced: December 2014 for TC 7..3
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.