Manage Selfview - Cisco TelePresence MX200 G2 User Manual

49 Camera

Manage Selfview

Outside a call:
Tap Camera.
In a call:
Tap the selfview avatar.
Pan
Tilt
Zoom
Tap Selfview to turn it on.
You may now resize the selfview
image (see the following page for
more), or control the camera's
pan, tilt and zoom (see the
previous page for more).
You may now switch
the selfview off, maximize
or minimize it, or select
Camera to gain access to
the camera control (see the
previous page for more on
camera control).
Tap anywhere outside the
menu to exit.
Tap anywhere outside the
menu to exit.
About Selfview
The Selfview shows what others see
from your video system. You will
normally use it to confirm that they
see what you want them to see.
The Selfview appears as a PiP
(Picture-in-Picture).
The position of Selfview PiP can be
changed if you wish—see "Move
the Selfview PiP" on page 51 for
details on this.
D1507606 User Guide
Cisco TelePresence SX10, SX20, MX200 G2,
MX300 G2, MX700, MX800, SX80
Produced: December 2014 for TC 7..3
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.