Cisco TelePresence MX800 Single Installation Manual page 8

Installation guide for Cisco TelePresence MX800 Single - Wall mount
5
Fasten clamp on monitor
A, D
While the monitor is still in the package,
mount the clamp on the rear side.
78-100255-02A0 | AUGUST 2015 | © 2015 Cisco Systems, Inc. All rights reserved.
1
Use the Allen key 2.5 mm
and loosen, but do not
remove, the premounted
screws.
3
Push the support bracket
tight against the back plate
of the monitor.
2
Slide the clamp in place on
the monitor and make sure
that all the small clamps are
properly fitted.
4
Tighten the screws and
check that the clamp is
properly fastened.
Page 8