Cisco TelePresence MX800 Single Installation Manual page 10

Installation guide for Cisco TelePresence MX800 Single - Wall mount
6
Lift and place monitor onto lower frame
The screws with wing nut, which you can see
1
from the sides of the monitor, must enter the
center slot on each side of the lower frame.
Do not let go of the monitor before it is
securely placed on the lower frame.
78-100255-02A0 | AUGUST 2015 | © 2015 Cisco Systems, Inc. All rights reserved.
Front view
Front view
Rear view
Rear view
Tighten the wing nuts on both sides.
2
They are accessed from the sides
of the monitor.
Page 10