Cisco TelePresence MX800 Single Installation Manual page 11

Installation guide for Cisco TelePresence MX800 Single - Wall mount
7
Fasten monitor and place cover
A
4 × M6x12, countersunk
2 × M6x90, countersunk
2 × M6x100, pan
2 × Bracket
78-100255-02A0 | AUGUST 2015 | © 2015 Cisco Systems, Inc. All rights reserved.
1 Enter the following screws:
• Four M6x12 screws, from front.
• Two M6x90 screws, from underneath.
• Two M6x100 screws and their brackets,
from underneath.
Then, tighten all screws.
Place the cover on the lower frame.
2
Left side of the Right side of the
monitor, viewed monitor, viewed
from underneath from underneath
Page 11