Cisco Aironet 350 series Quick Start Manual page 4

2 Connect and Power Up the Bridge (continued)
Step 4 Mount the antenna at an appropriate elevation to ensure maximum path clearance and
line-of-sight to another bridge or device. Refer to the documentation provided with your
antenna for mounting instructions.
Installing the Ethernet and Power Connections
Option 1
Switch with
inline power
SYST 1
RPS 2 3
4 5
STAT UTIL DUPLX SPEED 6
7 8
MODE 9 10Base-T / 100Base-
10 11 TX
12 13
14
15 16
17
18 19 Catalys t 2950
20 21 SERIES
22
23 24 100Base- FX
23
24
LEFT
SER IAL POR
T RIGH T/PR
ONL INE
POW ER
ETH ERN
ET
Bridge
Step 1 Consult the drawing above and choose a power supply option.
Connect the supplied Ethernet cable to the Ethernet port on the back of the bridge.
Step 2
Connect the other end of the Ethernet cable to one of the following:
Step 3
• A switch with inline power, such as a Cisco Catalyst 3524-PWR-XL Switch
• An inline power patch panel, such as a Cisco Catalyst Inline Power Patch Panel
• The end of a Cisco Aironet power injector labeled To AP/Bridge and the end labeled To
Network to the 10/100 Ethernet LAN.
Caution The power injector is designed for Cisco Aironet 350 series bridges and 350 series
access points only. Using the power injector with other Ethernet devices can damage the
equipment.
4
Option 2
Switch
(without inline power)
SYST RPS 1 2
3
STAT 4 5
UTIL DUPLX SPEED 6
7 8
MODE 9 10 10Base-T / 100Base-
11 TX
12 13
14 15
16
17 18
19 Catalys t 2950
20 21 SERIES
22 23
24 100Base- FX
23
24
Inline Power
Patch Panel
SYST
RPS
STAT UTIL DUPLX
SPEED
MODE
IMAR Y
Option 3
Switch
(without inline power)
SYST
RPS 1 2
3
STAT 4 5
UTIL DUPLX SPEED 6 7
8 10Base-T
MODE 9 10 / 100Base-
11 12 TX
13
14 15
16
17 18 Catalys t
19 20 2950
21 SERIES
22 23 100Base-
24 FX
23 24
Power injector
Universal
power
Power
supply
cord