Detection Jams; Jam Detection - Canon i-SENSYS MF4300dn Service Manual

4.2 Detection Jams

4.2.1 Jam Detection

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-SENSYS
MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn
The following cases are judged as jam.
1. In case of delay in reaching DS/DES or stationary during scanning of original
2. In case DS/DES is detected as ON at power-on (residual paper jam)
3. In case of detecting original of which length is 400 mm or longer
- Operation after Detection of Jam
The host machine stops scanning operation and displays "CHECK DOCUMENT" on the control panel. No jam code is displayed. In case of the model equipped
with fax function (with built-in speaker), the warning beep occurs at the detection of jam.
- How to release Jam
Remove the jammed paper and open / close the ADF upper cover
Chapter 4
0020-2677
4-5