Upper Cover; Preparation For Removing The Upper Cover; Removing The Upper Cover; Cartridge Cover - Canon i-SENSYS MF4300dn Service Manual

Chapter 9
[2]
[2] [3]

9.3.5 Upper Cover

9.3.5.1 Preparation for Removing the Upper Cover

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn
1) Remove the front cover.(page 9-2)Reference[Removing the Front Cov-
er]
2) Remove the right cover.(page 9-2)Reference[Removing the Right Cov-
er]
3) Remove the left cover.(page 9-3)Reference[Removing the Left Cover]
4) Remove the rear cover.(page 9-2)Reference[Removing the Rear Cover]
5) Remove the scanner unit.(page 3-3)Reference[Removing the Scanner
Unit]
6) Remove the printer cover.(page 9-4)Reference[Removing the Printer
Cover]

9.3.5.2 Removing the Upper Cover

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn
1) Remove the 4 screws [1], and detach the upper cover [2].
[1]

9.3.6 Cartridge Cover

9.3.6.1 Preparation for Removing the Printer Cover

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn
1) Remove the front cover.(page 9-2)Reference[Removing the Front Cov-
er]
2) Remove the right cover.(page 9-2)Reference[Removing the Right Cov-
er]
3) Remove the left cover.(page 9-3)Reference[Removing the Left Cover]
4) Remove the rear cover.(page 9-2)Reference[Removing the Rear Cover]
5) Remove the scanner unit.(page 3-3)Reference[Removing the Scanner
9-4
[1]
[2]
F-9-13
[2]
[1]
F-9-14
Unit]

9.3.6.2 Removing the Printer Cover

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn
1) Open the printer cover [1].
2) Remove the link stopper [2].
3) Remove the 2 pressure release levers [3] through the 2 holes [4].
[3]
[4]
0020-2729
Points to Note When Attaching
Make sure to attach the link stopper [2] after attaching the right cover. If
attaching the link stopper while attaching the printer cover, it may drop
inside the machine.
4) With the printer cover [1] opened, detach it upward.
0020-2730

9.3.7 Operation Panel Unit

9.3.7.1 Removing the Control Panel Unit

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
0020-2731
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn
1) Remove the 4 screws [1] and the 2 claws [2].
[3]
F-9-15
[1]
F-9-16
0020-2732
[1]
[4] [2]
0020-2733