Equipment Required; Overview Of The Installation Procedure; Table 2-1 Steps For Installing Your Camera - Honeywell HD54IP User Manual

Installation and Setup

Equipment Required

Overview of the Installation Procedure

18
The following tools might help you to complete the installation:
• Drill
• Screwdrivers
• Wire cutters
Note Please familiarize yourself with the installation procedure and complete each
step in the exact sequence given.
The initial installation of your camera consists of the following steps:
Table 2-1 Steps for Installing your Camera
Step
1 Remove the dome bubble and the turret.
2 Remove the gimbal.
3 Prepare the mounting surface.
4 Install the conduit plug.
5 Install the grommet (if required).
6 Mount the camera.
7 Connect the wiring.
8 Seal the wiring.
9 Adjust the camera.
10 Reinstall the dome bubble and turret.
See ...
page 20
page 20
page 21
page 22
page 22
page 23
page 23
page 26
page 26
page 28