Normal Operation - AEG CompuMaster 300 Operating Manual

Normal operation

0
0
will be sufficient for the next mains failure. The charging time
will be in minimum 48 hours.
0
0
an insufficient state (e.g. out of tolerance or exceeding value of
distortion). This signal has been supplied as supplementary
information without any influence concerning the eventual
necessity of automatic change-over to battery operation.
During normal operation
(Battery fully charged):
Under normal conditions
0
only LED ,,NORMAL" is
illuminated.
No action required.
During normal operation
(Battery being charged):
LED ,,NORMAL" blinking.
No action required, but it is
no sounding
being fully charged to be
sure that the stored energy
During normal operation
(mains undervoltage):
LED ,,NORMAL" will be
illuminated. In addition to
that LED ,,AUTONOMY"
will be blinking.
No action required, but
no sounding
mains voltage might be in