Connecting To An Hdtv With A Dvi Connector - Cisco PDS3241 Installation Manual

Connecting to an HDTV with a DVI Connector

Cables Used in this Confi guration
• 1 HDMI-to-DVI Cable or 1 HDMI Cable and 1 HDMI-to-DVI Adapter
• 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted
line] instead of the Audio Left/Right Cable as shown in the diagram, dependent upon
your TV's capabilities.)
Notes:
• The DVI port on the TV must support high-bandwidth digital content protection (HDCP).
• When you connect the HDMI connector to the DVI connector on your HDTV, you need
an HDMI-to-DVI adapter and a separate audio connection.
WARNING: Electric shock hazard! Unplug all electronic devices before
connecting or disconnecting any device cables to the receiver.
Back of Set-Top
CABLE IN
Back of HDTV
S-VIDEO
VIDEO
L/
MONO
AUDIO
R
HD 1
IN
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
ETHERNET
AUDIO
CENTER
CHANNEL IN
ON
AUDIO IN
DVI/HDCP
R
OPTICAL
INPUT
VIDEO
Y Y
L/
P L P
B MONO B
AUDIO
R
P P
R R
R
HD 2
IN OUT
CVBS L R
Y PB PR
DVI/HDCP
IN
OFF
L
ANT (75 )
ANT-1
L
AUDIO
OUT
R
ANT-2
IN
S/PDIF HDMI USB IR
15