Table of Contents
Advertisement
3 - 2
WiNG 4.4 Switch System Reference Guide
3.1 Viewing the Switch Interface
The Switch
Configuration
location. Use this information to assess whether the current firmware version is the most recent and if the number of
licenses available is correct to support the number of radio devices deployed. The values displayed within the screen can
be defined in numerous additional locations throughout the switch applet.
NOTE: The Motorola Solutions RF Management Software is a recommended utility to
plan the deployment of the switch and view its interface statistics once operational in the
field. Motorola Solutions RFMS can help optimize the positioning and configuration of a
switch (and its associated radios) in respect to a WLAN's MU throughput requirements
and can help detect rogue devices. For more information, refer to the Motorola Solutions
Website.
The switch screen displays two tabs supporting the following configuration activities:
•
Setting the Switch Country Code on page 3-2
•
Viewing Switch Statistics
NOTE: When the switch's configuration is successfully updated (using the Web UI), the
effected screen is closed without informing the user their change was successful.
However, if an error were to occur, the error displays within the effected screen's Status
field and the screen remains displayed. With file transfer operations, the transfer screen
remains open during the transfer and remains open upon completion (with status
displayed within the Status field).
3.1.1 Setting the Switch Country Code
When initially logging into the system, the switch requests that you enter the correct country code for your region. If a
country code is not configured, a warning message will display stating that an incorrect country setting will lead to the
illegal use of the switch. Consequently, selecting the correct country is extremely important. Each country has its own
regulatory restrictions concerning electromagnetic emissions (channel range) and the maximum RF signal strength
transmitted. To ensure compliance with national and local laws, be sure to set the
NOTE: To ensure proper operation of the Wireless Switch and Access Ports, make sure
the country code set on the Wireless Switch matches the country code set on the Access
Ports or Adaptive APs.
3.1.2 Viewing the Switch Configuration
To view a high-level display of the switch configuration:
1. Select
Switch
2. Click the
Configuration
tab provides high-level system, switch name and address information accessible from one
from the main menu tree.
tab.
Country
value correctly.
Advertisement
Table of Contents
Troubleshooting
