Led Codes; System Status Leds - Motorola RFS7000GR Installation Manual

3

LED Codes

The RFS7000 RF Switch has four vertically-stacked LEDs on its front panel. Each of the switch's
Gigabit Ethernet ports have two status LEDs. These LEDs display two colors (green & amber), and
three lit states (solid, blinking, and off). The following tables decode the combinations of LED colors
and states for the System Status LEDs and the Gigabit Ethernet LEDs.

3.1 System Status LEDs

3.1.1 Start Up / POST (Primary System or Redundant System)
System Status 1 LED
Off
Green Blinking
Green Solid
Green Solid
Amber Blinking
Alternating Green Blinking
& Amber Blinking
NOTE
System Status 1
System Status 2
Fan status
Temperature status
System Status 2 LED
Off
Green Blinking
Green Blinking
Off
Off
Alternating Green Blinking
& Amber Blinking
During switch start up, the Temperature status LED will be lit Solid
Amber. This is normal behavior and does not indicate an error. At the
completion of start up the Temperature Status LED will switch to Solid
Green.
Event
Power off
Power On Self Test (POST) running
POST succeeded (Operating System Loading)
POST succeeded (Normal Operation)
POST Failure
Boot Up Error: Device has an invalid checksum
Installation Guide 5