Specifications; Blower Safety Warnings - Makita UB1102 Instruction Manual

Hide thumbs Also See for UB1102:
Table of Contents

Advertisement

ENGLISH (Original instructions)

SPECIFICATIONS

Capacities
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
WARNING:
Switch off and remove plug from mains
before cleaning or maintenance.
Read the operator's manual.
Keep a hand away from rotating parts.
Keep bystanders away.
Wear eye protection.
Do not use in the rain or leave outdoors
while it is raining.
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In
observance
Directive,
Electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for blowing dust.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Model
Air pressure
Max. air volume
No load speed
Overall length
Net weight
Safety class
of
the
on
Waste
Electric
Equipment
environmentally
compatible
16,000 min
END022-1

BLOWER SAFETY WARNINGS

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Training
European
and
and
its
Preparation
1.
While operating the appliance, always wear
substantial footwear and long trousers.
2.
Do not wear loose clothing or jewellery that can
be drawn into the air inlet. Keep long hair away
from the air inlets.
3.
Wear protective goggles while operating.
ENE018-1
4.
To prevent dust irritation the wearing of a face
mask is recommended.
5.
Before using, check the supply and extension
ENF002-2
cord for signs of damage and aging. Do not use
the appliance if the cord is damaged or worn.
6.
Never operate the appliance with defective
guards or shields, or without safety devices, for
example debris collector in place.
2
UB1102
5.7 kPa
3
4.1 m
/min
-1
479 mm
2.0 kg
/II
Read the instructions carefully. Be familiar with
the controls and the proper use of the appliance.
Never allow children to use the appliance.
Never allow people unfamiliar with these
instructions
to
use
regulations may restrict the age of the operator.
Never operate the appliance while people,
especially children, or pets are nearby.
The operator or user is responsible for
accidents or hazards occurring to other
people or their property.
This appliance is not indented for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
UB1103
0 - 5.7 kPa
3
0 - 4.1 m
/min
-1
0 - 16,000 min
479 mm
2.0 kg
/II
GEB113-2
the
appliance.
Local

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ub1103

Table of Contents