Wireless Home Audio
To enable Party Mode, select Play To All 'Party Mode'.
A message will appear stating that the linking has been
successful. To unlink the devices, select Play To Local.
Settings
The Settings option contains many configuration options
for your Conductor. Following is a list of settings that are
configured with details on the following pages:
Source, page 42
•
Network Settings, page 43
•
Zones and Libraries, page 44
•
General Settings, page 44
•
Set Brightness, page 46
•
Set Bass & Treble, page 46
•
USB, page 47
•
About, page 47
•
Conductor/Wireless-N Digital Music Center
Source
You can connect an external analog audio source to your
Conductor using the Audio In jack on the front or back of
the Conductor. The Audio In jacks use stereo mini plug
connectors. You can connect stereo mini plug to stereo
mini plug or stereo mini plug to RCA cables. You can play
the music to all of the Wireless Home Audio devices in
your home. This allows you to stream music from sources
such as turntables, stereo systems, and MP3 players.
To play external analog audio, ensure that the cables are
connected from your external device to the Audio In of
the Conductor and perform the following steps:
1. Select Settings from the main menu.
2. Select Source from the Settings menu.
Using Your Conductor
42