Wireless Home Audio
Product Overview -
Conductor
Before You Begin
This User Guide is intended to provide details on the
product hardware, user interface, and use of the product.
For initial installation instructions, please refer to the Quick
Installation Guide included with your product.
Features
17.8 cm Wide Touchscreen
•
Slot-Loading CD player (Audio only)
•
Draft-N Wireless with Internal Antennas
•
Built-In Speakers
•
2 USB Ports
•
Wi-Fi Protected Setup button
•
Audio Formats: may be streamed in PCM or MP3,
•
Uncompressed Formats: WAV or PCM, Compressed
Formats: MP3, AAC, MP2, WMA
DLNA 1.5 and UPnP Compliant
•
Controlled by either the IR Remote (DMRIR500) or
•
the Controller – Wireless-N Touchscreen Remote
(DMWR1000)
Conductor/Wireless-N Digital Music Center
Product Overview - Conductor
Front Panel
Now Playing
Classic Music
Pause
Beethoven
Stop
Moonlight Sonata
1:45
Repeat
USB Port
Auxiliary Analog Input
Headphone Output
Speaker Grill
Detachable speaker grills.
LCD Touchscreen
The LCD touchscreen allows you
to control your music selections and playback options
directly on the screen.
Power/Standby
Power/Standby toggles between Power
on and standby mode. Standby mode
minimizes the power consumed by your
Conductor when not in use. Standby mode
allows you to power on your unit using
the remote control or power button on the
front panel. To completely power off the
Conductor, unplug the power cord from the
electrical outlet.
The LED flashes blue while powering up and
connecting to the network. It will remain
solid blue once the device is connected to
the network. When the device is in standby
mode, the LED will appear orange.
NOTE:
for 15 seconds will restore the
factory default settings.
WARNING:
default settings may revert to an
older version of the firmware. After
restoring the defaults, the firmware
can be updated manually or it
will be automatically updated if
autoupdates is selected.
3:18 PM
Speaker Grill
LCD Touchscreen
4:15
Power/Standby
Power LED and
IR Receiver
Window
CD Eject Button
(Blue/Orange) Pressing
Holding the Power button
Restoring the factory
5