How Do I Connect External Audio Devices; Internet Music And Radio Stations; Audiolounge - Linksys DMC350 User Manual

Wireless Home Audio
How Do I Connect External Audio
Devices?
You can connect an external analog audio source to your
Conductor using the Audio In jacks on the front or back
of the Conductor. The Audio In jacks use stereo mini plug
connectors. You can connect stereo mini plug to stereo
mini plug or stereo mini plug to RCA cables. You can play
the music to all the Wireless Home Audio devices in your
home. This allows you to stream music from sources such
as turntables, stereo systems, and MP3 players.
To play external analog audio, ensure that the cables are
connected from your external device to the Audio In of
the Conductor and perform the following steps:
1. Select Settings from the home menu.
2. Select Source from the Settings menu.
3. Select Music Room Conductor [Audio Inputs].
Conductor/Wireless-N Digital Music Center
4. Select Front Analog Line In if you want to use an
external audio source connected to the front of the
Conductor or select Rear Analog Line In to use an
external audio source connected to the back of the
Conductor.
The Now Playing queue will indicate your selection.

Internet Music and Radio Stations

Audiolounge

AudioLounge is a new online music service that gives you
unlimited access to millions of songs. You can listen to
full length CD quality tracks, discover new music and old
favorites, and even create and share playlists with friends
and family. With your new Wireless Home Audio products
and the audiolounge service, you can play your music
where you want and when you want.
NOTE: In order for your audiolounge service to
work properly with your Wireless Home Audio
devices, you must have used the Linksys by
Cisco EasyLink Advisor CD-ROM to set up your
Wireless Home Audio devices.
Common Uses
17