Makita 5008MG Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Saw
  5. 5008MG
  6. Instruction manual
Makita 5008MG Instruction Manual

Makita 5008MG Instruction Manual

Circular saw
Hide thumbs Also See for 5008MG:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
INSTRUCTION MANUAL

Circular Saw

5008MG
008185
DOUBLE INSULATION
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita 5008MG

Summary of Contents for Makita 5008MG

  • Page 1: Circular Saw

    INSTRUCTION MANUAL Circular Saw 5008MG 008185 DOUBLE INSULATION IMPORTANT: Read Before Using.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model 5008MG Blade diameter 210 mm at 90° 75.5 mm Max. Cutting depth at 45° 57 mm at 50° 51.5 mm No load speed (min 5,200 Overall length 332 mm Net weight 5.1 kg Safety class •...

  • Page 3: General Power Tool Safety Warnings

    Electrical safety Makita Corporation responsible Power tool plugs must match the outlet. Never manufacturer declare that the following Makita modify the plug in any way. Do not use any machine(s): adapter plugs with earthed (grounded) power Designation of Machine: tools. Unmodified plugs and matching outlets will Circular Saw reduce risk of electric shock.

  • Page 4: Circular Saw Safety Warnings

    up or carrying the tool. Carrying power tools Service with your finger on the switch or energising power 25. Have your power tool serviced by a qualified tools that have the switch on invites accidents. repair person using only identical replacement 14.
  • Page 5 Always use blades with correct size and shape (diamond versus round) of arbour holes. Blades that do not match the mounting hardware of the saw will run eccentrically, causing loss of control. Never damaged incorrect blade washers or bolt. The blade washers and bolt were specially designed for your saw, for optimum performance and safety of operation.
  • Page 6 Additional safety warnings 23. Use extra caution when cutting damp wood, pressure treated lumber, or wood containing knots. Maintain smooth advancement of tool without decrease in blade speed to avoid overheating the blade tips. 24. Do not attempt to remove cut material when blade is moving.

  • Page 7: Functional Description

    FUNCTIONAL DESCRIPTION CAUTION: Always be sure that the tool is switched off and • unplugged before adjusting or checking function on the tool. Adjusting depth of cut 1. Depth guide 2. Lever 000029 29. Some material contains chemicals which may be toxic.

  • Page 8: Switch Action

    NOTE: CAUTION: When changing the positive stopper's position, Do not apply impact to the lamp, which may cause • • loosening the lever and tilting the bevel angle to damage or shorted service time to it. less than the desired stopper position number Do not look in the light or see the source of light •...

  • Page 9: Operation

    Be sure the blade is installed with teeth pointing up • at the front of the tool. CAUTION: Use only the Makita wrench to install or remove the • Be sure to move the tool forward in a straight line blade.

  • Page 10: Maintenance

    If you need any assistance for more details regarding 007332 these accessories, ask your local Makita Service Center. Steel & Carbide-tipped saw blades • 1. Triangular rule General purpose blade for fast and smooth rip, Combination crosscuts and miters.
  • Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884738D229...

Table of Contents