Buffalo Nfiniti High Power WZR-HP-G300NH User Manual page 80

Chapter 4 Configuration
Parameter
Broadcast SSID
Use Multi Security function
Do not use Multi Security function
SSID1
SSID2
SSID3
Separate
SSID
Wireless authentication
Meaning
If [Allow] is checked, then the AirStation will respond to SSID
searches from wireless devices by broadcasting its SSID. If [Allow] is
unchecked, then the AirStation ignores SSID searches from wireless
devices.
Clicking [Use Multi Security function] will enable Multi Security,
allowing the use of multiple SSIDs, each with different wireless
security settings. Clicking [Do not usem Multi Security function] will
disable Multi Security. The AirStation will then allow one SSID and
one type of wireless security.
Note: When using Multi Security, enable at least one of the following:
SSID1, SSID2, or SSID3.
Multi Security SSID1 can use WPA-PSK-TKIP or WPA/WPA2-Mixed for
wireless security.
Multi Security SSID2 can use WPA-PSK-AES for wireless security.
Multi Security SSID3 can use WEP for wireless security.
When enabled, wireless devices connected to the AirStation can
communicate only with the Internet side, not with each other.
Set SSID using 1 - 32 alphanumeric characters.
Specifies an authentication method used when connecting to a
wireless device.
- 46 -