Chapter 10: Manual Installation And Setup For Windows Xp; Overview; Installing The Network Card's Newest Driver - Linksys EtherFast 10/100 User Manual

Chapter 10: Manual Installation
and Setup for Windows XP

Overview

After physically installing the EtherFast
follow these instructions to install the network device driver. Windows XP has
a built-in LNE100TX NIC driver. After physically installing the EtherFast
10/100 LAN Card into your PC, Windows XP will automatically install the
LNE100TX driver.
If you want to use the new driver on the LNE100TX(v5.1) Setup Utility CD,
you must update the driver for this device.

Installing the Network Card's Newest Driver

1. Power up your PC and start
Windows XP.
2. Click the Start button and open the Control Panel. Then, double-click the
Performance and Maintenance icon.
3. Double-click the System icon and select Hardware.
51
Instant EtherFast ® Series
® 10/100 LAN Card in your computer,
EtherFast ® 10/100 LAN Card
4. Open the Device Manager and expand the Network Adapters section.
Double-click Linksys LNE100TX Fast Ethernet Adapter (LNE100TX
v4).
®
5. Choose the Driver
tab and click the
Update driver...
button..
52