Installing The Etherfast - Linksys EtherFast 10/100 User Manual

Installing the EtherFast

®
Driver if Networking is Already Installed
The following steps are for NT PCs that have networking already installed
according to the Windows NT documentation. If you have not already installed
networking onto your NT PC, please refer to your Windows documentation.
These steps will install the EtherFast
your PC, enabling your PC to properly communicate with the card. Remember
that you must be logged on as a network administrator to continue.
1. Click on Start, Settings, Control Panel, then double-click on the Network
icon.
2. When the networking window appears, choose the Adapters tab and click
the Add button.
43
Instant EtherFast
10/100 LAN Card Network
® 10/100 LAN Card's driver software on
® Series
EtherFast ® 10/100 LAN Card
3. When the list of available network adapters appears, click the Have Disk but-
ton.
4. Put the Linksys LNE100TX (ver. 5) 10/100 LAN Card Setup Utility CD into
your CD-ROM drive. Type D:\Drivers into the field and click the OK but-
ton.
44