Recall Time; Dial Mode; First Ring - Motorola StarTAC SC200 Owner's Manual

10.6

Recall time

This setting is useful to access certain network and PABX
/ switchboard services.
The default SC200 recall time is suitable for your country
and network operator. It is unlikely that you should need
to change this setting unless advised to do so.
1. Press , the display shows PHONEBOOK.
2. Scroll to ADVANCED SET
3. Scroll to RECALL
TIME and press
4. Scroll or to SHORT, MEDIUM or LONG and press
.
5. Press to return to standby.
10.7

Dial mode

Your SC200 is set to tone dialling. You should only
need to change this if connected to an older type of
switchboard / PABX which requires Pulse dialling.
1. Press , the display shows PHONEBOOK.
2. Scroll to ADVANCED SET
3. Scroll to DIAL
MODE and press
4. Scroll or to TONE or PULSE and press
5. Press to return to standby.
34
and press .
.
and press .
.
.
10.8

First ring

Your SC200 will automatically detect the Caller ID
(subscription dependent). If you do not wish to hear the
ring before the Caller ID is displayed you can manually
set FIRST RING to OFF. The default setting is ON.
1. Press , the display shows PHONEBOOK.
2. Scroll to ADVANCED SET
3. Scroll to FIRST RING
4. Scroll or to select ON
5. Press to return to standby.
and press .
and press .
or OFF press .
Advanced settings