LG GD910 User Manual page 14


Select Activate to request the network to activate call waiting.

Select Deactivate to request the network to deactivate call waiting.

Select Query Status to check if the function is active or not.

Call Divert allows you to direct your incoming calls to another number.
Select one of the call diverts options from the Call Divert list. Select
Cancel All Divert to cancel all active forwarding.

Call Barring allows you to restrict outgoing and incoming calls with
your phone:

The default password for this function is 0000.

Select Outgoing Calls to set restriction on for outgoing calls.

Select Incoming Calls to set restriction on for incoming calls.

Select Cancel All to cancel all active call restrictions.

To change the password for this function, select Change Barring PW.
Note: Only use the Call barring service if your network provider has
provided it.

Line Switching allows you to switch between different network service
lines. This function is only available if the SIM card supports it and has
two subscriber numbers on it. Select the phone line you want to use for
making calls and sending short messages.

Call Time Reminder notifies you of the end of a set call duration:

Select Single to set a single beep tone reminder. Enter the duration in the
range of 1 to 3000 seconds.

Select Periodic to set a periodical beep tone reminder. Enter the duration
in the range of 30 to 60 seconds. If you have entered 40 seconds, the call
time reminder will sound a beep after 40 seconds of the call, and
subsequently at every one minute interval – 1 minute and 40 seconds, 2
minutes and 40 seconds, and so on.

Select Call Time Display to view the duration of your incoming and
outgoing calls.

Auto Redial sets the phone to redial after an unsuccessful call attempt.

Closed User Group allows you to specify a group of people whom you
can call and who can call you. Each group is identified by a unique
five-digit number known as the CUG Index. You can save up to ten
groups.
13