Functional Description; Adjusting The Depth Of Cut - Makita 4131 Instruction Manual

FUNCTIONAL
DESCRIPTION
1
2
1. Lever
2. Depth guide
A
1
1. Cutting line
1
1. Switch trigger
2. Lock-off button
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.

Adjusting the depth of cut

005344
Loosen the lever on the depth guide and move the base up
or down. At the desired depth of cut, secure the base by
tightening the lever.
CAUTION:
• After adjusting the depth of cut, always tighten the lever
securely.
Sighting
005345
When cutting, align the A position on the front of the base
with your cutting line on the workpiece.
Switch action
005346
CAUTION:
2
• Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
To prevent the switch trigger from being accidentally pulled, a
lock-off button is provided.
To start the tool, push in the lock-off button and pull the
switch trigger. Release the switch trigger to stop.
9